TWP_1000x1000_zm.jpg
Images are representations only.

TWP Series Externally Heated Desiccant Air Dryer

Brand: Airtek - by Parker
Request Information

Compressed air is polluted with dirt particles, water, oil, oil vapor, and condensate.  These contaminants result in high maintenance costs, premature wear, spoiled products and the failure of control systems.

A Parker Airtek TWP Series Externally Heated Desiccant Air Dryer will effectively remove contaminants such as dirt, water, and oil. The traditional adsorption principle used in this design is simple, robust and flexible. Continuous drying is accomplished by the operation of two desiccant towers.

Compressed air is dried through one tower while the other desiccant tower is being regenerated. The regeneration heating cycle of desiccant is accomplished using a dry air purge flow heated by an external electric heater. The regeneration cooling cycle is performed using the same flow of dry compressed air taken from the desiccant air dryer outlet to ensure continuous dewpoint performance.
Features
  • Flow rate starting at 200 scfm (340 m³/hr)
  • Delivered air quality is in accordance with ISO 8573.1: 2001, the international standard for compressed air quality
  • Pressure dewpoints of -100° F (-70° C) & -40° F (-40° C) (ISO 8573.1: 2001 Classes 1 & 2) are available
  • Parker Airtek pre- and after compressed air filters - Standard
  • PowerLoc Energy Management System - Standard
  • Low-wattage high incoloy sheathed heater for efficient regeneration
  • High-efficiency, quiet running regenerative (up to 3,000 scfm) or centrifugal blowers (4,000 scfm and larger)
  • Parker non-lubricated full-flow angle seat valves, which carry a FIVE YEAR VALVE WARRANTY, are standard on dryers up to 800 scfm
  • High performance, actuated butterfly switching valves, which carry a FIVE YEAR VALVE WARRANTY, are standard on dryers 1,000 scfm and larger
  • Insulated tower, heater and purge lines increase dryer performance and efficiency by reducing radiant heat loss plus keeps the unit with the safety parameters set forth by OSHA
  • Easy to use Control Center affords superior dryer control along with digital telemetry for remote analysis of performance
  • Custom filter packaging
  • 7” HMI, Allen-Bradley® PLC
  • Flash drive port for transferring data log
  • Serial communications port (optional)
  • Emergency stop and standby mode
  • Automatic data logging 24/7, 365 days of all operational information

Specifications

Brand

After-Filter Part Number

  • JC0150-FH, JC0250-FH, JC0350-FH, JC0450-FH, JC0625-FH, JC0800-FH, JC1000-FH, JLA1800-FH, JLA2600-FH, JLA3506-FH, Consult Factory

After-Filter Replacement Element

  • JE-FC0150-HT, JE-FC0350-HT, JE-FC0450-HT, JE-FC0625-HT, JE-FC0800-HT, JAE4-FH, (2) JAE4-FH, (3) JAE3-FH, Consult Factory

Connection Type

  • 1" NPT, 1-1/2" NPT, 1-1/2" NPT, 2" NPT, 3" Flange, 4" Flange, 6" Flange, 8" Flange

Depth (inch)

  • 18, 22, 27, 28, 35, 41, 60, Consult Factory

Dryer Technology

  • Desiccant, Externally Heated

Height (inch)

  • 83, 85, 87, 88, 89, 92, 93, 102, 113, 110, 112, Consult Factory

Installed Condensate Drain

  • Timed Solenoid Drain, Demand Solenoid Drain

Maximum Ambient Temperature (°F)

  • 120° F

Maximum Flow Rate (m³/hr)

  • 170, 229, 340, 425, 510, 680, 850, 1019, 1359, 1699, 2038, 2548, 3398, 4417, 5097, 6796, 8495, 10194, 13592

Maximum Operating Pressure (psi)

  • 150, 135

Maximum Operating Temperature (°F)

  • 120° F

Minimum Ambient Temperature (°F)

  • 40° F

Minimum Operating Pressure (psi)

  • 80

Minimum Operating Temperature (°F)

  • 50° F

Pre-installed Optional Accessories

  • Pre & after Filtration

Prefilter Part Number

  • JC0110-C, JC0150-C, JC0250-C, JC0350-C, JC0450-C, JC0625-C, JC0800-C, JC1000-C, JLA1603-C, JLA2100-C, JLA3200-C, JLA3206-C, Consult Factory

Prefilter Replacement Element

  • JE-CC0110, JE-CC0150, JE-CC0350, JE-CC0450, JE-CC0625, JE-CC0800, (2) JAE3-C, (3) JAE3-C, (4) JAE3-C, Consult Factory

Purge Rate

  • 7, 9.45, 14, 17.5, 21, 28, 35, 42, 56, 70, 84, 105, 140, 182, 210, 280, 350, 420, 560

Rated Inlet Pressure (psi)

  • 100

Type

  • Heated

Weight (Lbs)

  • 680, 720, 920, 1180, 1370, 1400, 2060, 2350, 3035, 4195, 5215, 7765, 8565, 11562, 12002, Consult Factory

Width (inch)

  • 31, 40, 43, 47, 50, 52, 63, 74, 78, 96, Consult Factory

Documentation

Data Sheets

show more